Saturday, November 9, 2019

Just an average day

Let me tell you about my day. I went in to work today, we're making these stainless steel plates, a job straight from the pits of hell. Been doing it for 5 months now and when we first started I jokingly said it would take until Thanksgiving to finish. Looks like it will actually be past that. Work went OK, I managed to get done what I planned to do. After that I replaced the hinge pins on my Ranger driver's door. We made some pins about 2 years ago, used stainless steel but it was too soft and they wore grooves. I found some replacement pins with bushings on Ebay for around $8, bought them several weeks ago, just haven't had time to install. Took out the old pins, drilled out the holes to accept the new over-sized bushings and put everything back together. I wanted to make some wax cell cups today, and was thinking of using a turkey baster to move the melted wax. So I stopped at WalMart looking for a baster. $12 for a turkey baster, not. But I did have an idea while standing there. I could use one of those nasal aspirators. It's a little suction bulb parents use to suck snot out of an infant's nose. I actually have one of those, used it on a different job. While I'm standing there I see someone walk by with a new bike, and I think I should get new tubes for my bike. I knew it had a flat which had been repaired several times. Walmart used to have these never-flat tube inserts. It's a solid rubber insert that takes the place of a tube. Just being curious I walked over. They didn't have any. I looked at tubes, a basic tube is about $5, puncture resistant self sealing tubes $12. While I wanted to get my bike back in service, it's a luxury. Vicki has now been out of work for three months. We still have received nothing from the other party's insurance and her short term disability insurance is jerking us around. While $20 may not seem like much, it does add up and in my life, with things constantly breaking, and being a pragmatist, it was an expense I could not justify. Heading home, I have some old wax that had moths and beetle larvae, and some that got wet and was growing mold so they needed to be rendered down. The propane tank was empty, I knew that and planned to get it filled this weekend. Got the tank from the back yard, walked to the truck and noticed water dripping underneath. Looked and saw it coming down the front of the engine, typical of a water pump but the pump is less than 1 year old. Opened the hood. checking hoses, squeezed the upper hose and I saw a tiny stream of water from the thermostat jacket. Rubbed my finger over it and now it's pouring out, stream is 1/8 inch in diameter. Wonderful! No way to find a water jacket for a 1993 ford on a Saturday. I have some JB weld quick, I can pull off the jacket and put on a patch. But I don't have a gasket. Auto-zone has a gasket, they're 3.3 miles away. I also only have the one vehicle but I have a bike with a flat tire. Took off the tire and patched it, this is now 5 patches on this tube. The hole was right next to a previous hole and it's suspiciously on a seam. Put in some air, soapy water, no leaks so back together and I'm off to AZ. 2.3 miles later and the tire is flat. Pushed to AZ. Got the gasket, took off the tire and the tube has a split on the seam 3 inches long. Pushed it back home. Some of my pious acquaintances will say that God was telling to fix my bike. If that's true He wasn't speaking loud enough. On a positive note, the time it took to travel allowed the JB weld to set up. Put the truck back together. I did get the propane tank exchanged and I made some wax cell cups for Sunday. Did not render wax as it was dark. This wasn't a very good day, and I have at least two of these every week. Someone is always calling me with something that's broke, last Wednesday, just as I got home. my youngest son called. His car was dead in the middle of the road on his way to work. Spent about 40 minutes under the car in the dirt but I did get it running. I'm thankful for the skills to fix stuff, but I'm getting tired.

Sunday, September 22, 2019

These fascinating little bugs.

I love working with bees, I aways learn so many things from and about them. Two items today. In the club yard I have a colony that recently re-queened. they haven't been very strong, in a 10 frame box and I debated moving them to something smaller. Today we saw only older brood and larvae, nothing younger than 7 days. So we determined there was no queen in the box.  Another club member noticed a large cluster under the stand hanging on the bottom board. So what's going on, are they swarming, just hanging out?  We started scooping up bees and putting them in the box. Found a small piece of new comb under the box, with eggs. Upon further conversation and reflection we determined that the bees under the box were actually a swarm, probably from a feral removal that was placed in the club yard last week, which today had about 1/4 the amount of bees. Maybe they detected a weak colony, or maybe it was just convenience. In any case, by the time I was ready to leave, they were all in the box. 

Second item; I graft queens every week and sometimes I go 9 or 10 days. When I'm going a bit long, I'll put the previous graft frame above an excluder so 9 or 10 days later I can put the capped brood in the cell builder. So today I'm on a long cycle, today is day 10. I opened the top box to move the brood frame, when I pulled it out there were 3 queen cells. While I've been told that bees will make queens above an excluder, we tried it with grafts last year with no luck. So as I debate what to do with these cells, I see one open up and out she comes. Bees can make queens from larvae from day 4 to 6. So it would appear that when I moved that frame, they started making  a queen from a day 6 larvae. Cut out the rest and put in incubator.  Went below the excluder to get a graft frame, saw the queen, one of my Picasso's, nice gob of white on her back. Talk about good timing.

Wednesday, August 7, 2019

Why don't you....

Just shut up! At least that's my thoughts this morning. I must admit that I too have been guilty of this problem, trying to stop. Sometimes we all ask questions. Can I do; whatever. But instead of a simple answer, we either give or receive all sorts of advice on how to do it differently. That wasn't the question. I get suggestions on my gadgets all the time. Why don't you silk screen, why don't you have a stamp made, why don't you..... any number of things. Simple answer, I don't want to. If I wanted to change the way I make things, I might ask. And if I ask for advice, that's one thing. If I ask a single question, something that might have a simple yes or now answer, then just give the answer. Next time you feel like saying something like, Why don't you, or you should, or have you thought of, stop and consider how you might feel if people do the same to you. And yes I did just give some unsolicited advice, you're welcome.

Thursday, July 25, 2019

I'm sorry but your mistakes do define you

OK the title is meant to pique your interest and I'll explain my point in a bit. Over the past week or so I've noticed some yard signs. Plain white coroplast with black letters. They have writing on both sides, on each sign that I saw, one side says Don't give up!, the back side says one of the following; You matter, You are enough, and Your mistakes do not define you. I'm not sure where they came from, my thoughts are probably a local church, trying to be encouraging. I get the sentiment. Over the past couple of days I found that I was actually irritated by one of the signs, and with a little more thought realized how wrong some of them are. You are not enough, sorry to say but none of us are enough. We all need others, we need stuff. But the sad reality is that when the need is greatest, or when it really hurts, we're alone. Hopefully we are enough for that time and place. I like the "Don't give up " attitude, very few people succeed on the first try. Or the second or third for that matter, keep on trying. But the thing which really sets me off is that our mistakes do not define us. The reality is that we are a combination of successes and failures. Most of us learn from our mistakes, sometimes we repeat them. In fact all of us have those things which no matter how hard we try, no matter how bad it may get, we still do it over and over again. Addictions fall into this category and as so many successful programs show us, such as alcoholics anonymous, to overcome these destructive habits one MUST have support. So no you are not enough, at least not for that. Back to mistakes defining us. Still don't agree, let me make an example, Richard Nixon. You just thought of one word right? Nixon was actually a pretty good president. He established trade with China, got the U.S. out of Viet Nam, and established title IX collegiate sports. There are other things he did but what do we remember? Watergate. Yes our failures and mistakes mark us, while it's easier to overcome some foolishness we do at 15 than it is at 35, the things we did at 15 will affect us when we're 60. That's what's been bugging me lately. Like everyone I've done some dumb things in my past, most have helped forge me into what I am today. But the worst mistake I ever made was about 20 years ago, and I am painfully reminded of it every single day. The platitude to put the past behind me just isn't possible. I can't fix it and I can't escape from the reminders. The bottom line is that we will all fail, we all have some things that we need help with and we'll all make mistakes. Very few of us will ever find that special friend with whom we can share anything and who will smack us when we're being stupid. If you have that you are so specially blessed. But one of the signs is so very right, You matter. Even with your flaws, the dumb mistakes, the addictions and every other problem, YOU MATTER. Every day you touch the life of someone else, it can be for good or for bad. Some people will remember you and others will forget you, but in the day to day activities, we all have impact on others. Live life with care, try not to make to many mistakes, lean on someone when you can't walk alone, and let someone else lean on you. Make a difference every day because You Matter!

Tuesday, July 23, 2019

Just add a frame of eggs and larvae

How many times have you heard this, or even said it?  I've said it myself so many times, and in the past few days I've seen it posted on a number of Facebook pages. It seems like this is the go-to solution to so many problems. It's the most common solution to having no queen, or suspected of having no queen. The problem though is it doesn't take into account the reason for the problem. In my first year keeping bees I lost a queen, actually lost more than one and I still lose queens. In this particular case it had been a little over two weeks since I'd been in the box. Went in and there were capped brood, no signs of eggs or any larvae. I was advised, and having read as much as possible, I added a brood frame with eggs and larvae. Checked it in four days also as advised to see if they were making queens. They weren't making queens so it was assumed that there was already a queen in the box. Probably an unmated virgin or recently mated but just not laying yet. Waited another week, no sign of eggs and again I was advised to add a brood frame. So I did. Again no queens. I ended up putting in three frames of brood, they never made a queen and I wound up with laying workers. Maybe the laying workers were there before the first or second brood frame, I don't know but I don't think so. There were no capped cells of any kind, no brood and no drones. I spent a month trying to fix a problem that could not be fixed. Since this I've done more research and spoken with a lot of people. There are times when a colony of bees can get queen-less and simply not make a new queen. Like they just don't care or something. I don't know any way to determine this but I've seen it happen more than once. It's like they get past some arbitrary day, maybe it's 22 or 26 or 30. Maybe it's weather and some other factors but it happens. When I look back on the colony I tried to save, with all of the resources I put into it, I could have made a new split. I think it's important to consider that just putting in a frame of brood may not fix the problems. Are there other options? Actually there are. Factors need to be weighed. How big is the sick colony? Can it simply be merged with another? Do I have enough resources to invest a single frame of brood? Is it worth more than one frame? I've had more laying worker boxes since that one. We, as a club, have tried pretty much every published method to fix laying workers. What we learned is that you can't fix laying workers. My philosophy is to simply shake the bees out in the yard. Any food in frames are added to a strong colony. I just had to do this last week. My current plan on a relatively strong queen-less colony is a single frame of brood for just a few days. I'll add the frame, check it in four days and if there are no queen cells, it's going back where it came from. My other thoughts are to put in a frame of grafts. Or if not grafts, cut a strip of eggs and larvae, press it into a frame vertically oriented and see if they make queens. I don't believe that a box of bees that won't make a queen are worth keeping. Sometimes we just need to accept there will be some losses.

Saturday, July 20, 2019

Practical beekeeping, and queen rearing


I've had an interesting week, a bit of a roller coaster actually. Some things went as planned and some didn't. One of my cell builders failed miserably and at the same time I cut some capped queen cells from two beehives. One that I intentionally made queen-less and one that I didn't. So in all I actually ended up with more than the cell builder would have yielded. Early in the week I was faced with a dilemma, putting together mating nucs for all of the unexpected queens. It was looking like I might get 20 when I was just expecting 10 or 12. I have the boxes, the problem has been having a frame or two of bees for a mating nuc. I was kicking the idea around Wednesday and Thursday, of what to do. The whole thing is a bit ironic as I've been advocating having a plan for everything. I actually have a long term plan for making queens, I just lost sight of the obvious. My long term plan is to have 30-40 mating nucs and swapping 12-18 mated queens each week. My original plan was to start out with 10-12 mating nucs, and as the queens mate, and brood grows in the nucs, I could split the nucs to make more. That was the plan. It's actually worked somewhat but a bit slow. The problem is, or at least was, that my focus has been on that plan and I sort of missed the obvious, more on that later. My long term plan is to have three breeder queens, each one perhaps a different breed. I'd like to get a Carpenter Martha, maybe a Saskatraz, and an Italian hybrid. The queens would all be open mated so the end results might be interesting. To make cell builders, which I currently like using a 5 frame nuc box for this, I need four or five strong colonies. The idea is to start with 1 builder and add one each week. Then break down and rebuild the oldest builder every three weeks. That's the plan now, it might turn into just two builders, it depends on how well I get at grafting. So this means I need 8 strong colonies to do what I plan. Thursday night I woke up and had an epiphany, I currently have, or at least on Thursday had 16 beehives, here is the obvious, I have twice the number of colonies than I need.  Sort of lost track of this in everything else that I'm doing. Ten of those are what I'd consider to be strong colonies.  So Friday I just broke down two weaker colonies and used those bees to make mating nucs. I had enough boxes, made up another triple 3 frame queen castle. One of the colonies I broke down was a queen-less hive from a recent cut out, didn't get the queen but I had 6 frames of bees and 5 brood frames. There were the beginnings of some queen cells on the comb, with some regrets I cut them off. In the end I pulled five mated queens and put 18 in mating nucs. There are 6 cells in the current builder which I expect to come out next Friday, the plan is to make one more triple 3 frame castle and another twin 2 frame mating nuc. This will put me at 28 mating nucs. I'm also thinking of parting with a couple of beehives since I have more than I need or want. I guess I got lost in the excitement of getting more colonies of bees.

Saturday, June 29, 2019

Another patent infringement

I received two messages today, someone has copied my Beehive Frame Fingers design and they're selling them. There are two small differences. My holders are designed for a single frame, and they're made of aircraft aluminum. The copy holds two frames and are 3D plastic printed. Interesting the price is the same, don't know what the copier is charging for shipping. Yes I'm irritated, and a little angry. My options are somewhat limited. The market for these items isn't huge, it may change in the future but it's an item limited to the beekeeping community so there is a limited audience. I can ask that they stop production. If I want to enforce my patent I need to hire an attorney, might go to court and seek a federal cease and desist order. That's expensive. For a small business, as in 1 person, it's a pretty big expense and quite frankly not something I can afford or justify. I'll probably just keep making my product which I feel is of better quality and guaranteed for life. Don't know if the copy is.